# testharness.js API
## Introduction ##
testharness.js provides a framework for writing testcases. It is intended to
provide a convenient API for making common assertions, and to work both
for testing synchronous and asynchronous DOM features in a way that
promotes clear, robust, tests.
## Basic Usage ##
The test harness script can be used from HTML or SVG documents and web worker
scripts.
From an HTML or SVG document, start by importing both `testharness.js` and
`testharnessreport.js` scripts into the document:
```html
```
Refer to the [Web Workers](#web-workers) section for details and an example on
testing within a web worker.
Within each file one may define one or more tests. Each test is atomic in the
sense that a single test has a single result (`PASS`/`FAIL`/`TIMEOUT`/`NOTRUN`).
Within each test one may have a number of asserts. The test fails at the first
failing assert, and the remainder of the test is (typically) not run.
If the file containing the tests is a HTML file, a table containing the test
results will be added to the document after all tests have run. By default this
will be added to a `div` element with `id=log` if it exists, or a new `div`
element appended to `document.body` if it does not.
NOTE: By default tests must be created before the load event fires. For ways
to create tests after the load event, see "Determining when all tests
are complete", below.
## Synchronous Tests ##
To create a synchronous test use the `test()` function:
```js
test(test_function, name, properties)
```
`test_function` is a function that contains the code to test. For example a
trivial test for the DOM
[`hasFeature()`](https://dom.spec.whatwg.org/#dom-domimplementation-hasfeature)
method (which is defined to always return true) would be:
```js
test(function() {
assert_true(document.implementation.hasFeature());
}, "hasFeature() with no arguments")
```
The function passed in is run in the `test()` call.
`properties` is a javascript object for passing extra options to the
test. Currently it is only used to provide test-specific
metadata, as described in the [metadata](#metadata) section below.
## Asynchronous Tests ##
Testing asynchronous features is somewhat more complex since the result of
a test may depend on one or more events or other callbacks. The API provided
for testing these features is intended to be rather low-level but hopefully
applicable to many situations.
To create a test, one starts by getting a `Test` object using `async_test`:
```js
async_test(name, properties)
```
e.g.
```js
var t = async_test("DOMContentLoaded")
```
Assertions can be added to the test by calling the step method of the test
object with a function containing the test assertions:
```js
document.addEventListener("DOMContentLoaded", function() {
t.step(function() {
assert_true(e.bubbles, "bubbles should be true");
});
});
```
When all the steps are complete, the `done()` method must be called:
```js
t.done();
```
As a convenience, `async_test` can also takes a function as first argument.
This function is called with the test object as both its `this` object and
first argument. The above example can be rewritten as:
```js
async_test(function(t) {
document.addEventListener("DOMContentLoaded", function() {
t.step(function() {
assert_true(e.bubbles, "bubbles should be true");
});
t.done();
});
}, "DOMContentLoaded");
```
which avoids cluttering the global scope with references to async
tests instances.
The properties argument is identical to that for `test()`.
In many cases it is convenient to run a step in response to an event or a
callback. A convenient method of doing this is through the `step_func` method
which returns a function that, when called runs a test step. For example:
```js
document.addEventListener("DOMContentLoaded", t.step_func(function() {
assert_true(e.bubbles, "bubbles should be true");
t.done();
}));
```
As a further convenience, the `step_func` that calls `done()` can instead
use `step_func_done`, as follows:
```js
document.addEventListener("DOMContentLoaded", t.step_func_done(function() {
assert_true(e.bubbles, "bubbles should be true");
}));
```
For asynchronous callbacks that should never execute, `unreached_func` can
be used. For example:
```js
document.documentElement.addEventListener("DOMContentLoaded",
t.unreached_func("DOMContentLoaded should not be fired on the document element"));
```
Keep in mind that other tests could start executing before an Asynchronous
Test is finished.
## Promise Tests ##
`promise_test` can be used to test APIs that are based on Promises:
```js
promise_test(test_function, name, properties)
```
`test_function` is a function that receives a test as an argument. It must
return a promise. The test completes when the returned promise settles. The
test fails if the returned promise rejects.
E.g.:
```js
function foo() {
return Promise.resolve("foo");
}
promise_test(function() {
return foo()
.then(function(result) {
assert_equals(result, "foo", "foo should return 'foo'");
});
}, "Simple example");
```
In the example above, `foo()` returns a Promise that resolves with the string
"foo". The `test_function` passed into `promise_test` invokes `foo` and attaches
a resolve reaction that verifies the returned value.
Note that in the promise chain constructed in `test_function`
assertions don't need to be wrapped in `step` or `step_func`
calls. However when mixing event handlers and `promise_test`, the
event handler callback functions *do* need to be wrapped since an
exception in these functions does not cause the promise chain to
reject. The best way to simplify tests and avoid confusion is to **limit the
code in Promise "executor" functions to only track asynchronous operations**;
place fallible assertion code in subsequent reaction handlers.
For example, instead of
```js
promise_test(t => {
return new Promise(resolve => {
window.addEventListener("DOMContentLoaded", t.step_func(event => {
assert_true(event.bubbles, "bubbles should be true");
resolve();
}));
});
}, "DOMContentLoaded");
```
Try,
```js
promise_test(() => {
return new Promise(resolve => {
window.addEventListener("DOMContentLoaded", resolve);
}).then(event => {
assert_true(event.bubbles, "bubbles should be true");
});
}, "DOMContentLoaded");
```
Unlike Asynchronous Tests, Promise Tests don't start running until after the
previous Promise Test finishes. [Under rare
circumstances](https://github.com/web-platform-tests/wpt/pull/17924), the next
test may begin to execute before the returned promise has settled. Use
[add_cleanup](#cleanup) to register any necessary cleanup actions such as
resetting global state that need to happen consistently before the next test
starts.
`promise_rejects_dom`, `promise_rejects_js`, and `promise_rejects_exactly` can
be used to test Promises that need to reject:
```js
promise_rejects_dom(test_object, code, promise, description)
promise_rejects_js(test_object, constructor, promise, description)
promise_rejects_exactly(test_object, value, promise, description)
```
The `code`, `constructor`, and `value` arguments are equivalent to the same
argument to the `assert_throws_dom`, `assert_throws_js`, and
`assert_throws_exactly` functions. The `promise_rejects_dom` function can also be called with a DOMException constructor argument between the `code` and `promise` arguments, just like `assert_throws_dom`, when we want to assert that the DOMException comes from a non-default global.
Here's an example where the `bar()` function returns a Promise that rejects
with a TypeError:
```js
function bar() {
return Promise.reject(new TypeError());
}
promise_test(function(t) {
return promise_rejects_js(t, TypeError, bar());
}, "Another example");
```
## `EventWatcher` ##
`EventWatcher` is a constructor function that allows DOM events to be handled
using Promises, which can make it a lot easier to test a very specific series
of events, including ensuring that unexpected events are not fired at any point.
Here's an example of how to use `EventWatcher`:
```js
var t = async_test("Event order on animation start");
var animation = watchedNode.getAnimations()[0];
var eventWatcher = new EventWatcher(t, watchedNode, ['animationstart',
'animationiteration',
'animationend']);
eventWatcher.wait_for('animationstart').then(t.step_func(function() {
assertExpectedStateAtStartOfAnimation();
animation.currentTime = END_TIME; // skip to end
// We expect two animationiteration events then an animationend event on
// skipping to the end of the animation.
return eventWatcher.wait_for(['animationiteration',
'animationiteration',
'animationend']);
})).then(t.step_func(function() {
assertExpectedStateAtEndOfAnimation();
t.done();
}));
```
`wait_for` either takes the name of a single event and returns a Promise that
will resolve after that event is fired at the watched node, or else it takes an
array of the names of a series of events and returns a Promise that will
resolve after that specific series of events has been fired at the watched node.
`EventWatcher` will assert if an event occurs while there is no `wait_for`()
created Promise waiting to be fulfilled, or if the event is of a different type
to the type currently expected. This ensures that only the events that are
expected occur, in the correct order, and with the correct timing.
## Single Page Tests ##
Sometimes, particularly when dealing with asynchronous behaviour,
having exactly one test per page is desirable, and the overhead of
wrapping everything in functions for isolation becomes
burdensome. For these cases `testharness.js` support "single page
tests".
In order for a test to be interpreted as a single page test, it should set the
`single_test` [setup option](#setup) to `true`.
```html
Basic document.body test
```
The test title for single page tests is always taken from `document.title`.
## Making assertions ##
Functions for making assertions start `assert_`. The full list of
asserts available is documented in the [asserts](#list-of-assertions) section
below. The general signature is:
```js
assert_something(actual, expected, description)
```
although not all assertions precisely match this pattern e.g. `assert_true`
only takes `actual` and `description` as arguments.
The description parameter is used to present more useful error messages when
a test fails.
When assertions are violated, they throw a runtime exception. This interrupts
test execution, so subsequent statements are not evaluated. A given test can
only fail due to one such violation, so if you would like to assert multiple
behaviors independently, you should use multiple tests.
NOTE: All asserts must be located in a `test()` or a step of an
`async_test()`, unless the test is a single page test. Asserts outside
these places won't be detected correctly by the harness and may cause
unexpected exceptions that will lead to an error in the harness.
## Optional Features ##
If a test depends on a specification or specification feature that is OPTIONAL
(in the [RFC 2119 sense](https://tools.ietf.org/html/rfc2119)),
`assert_implements_optional` can be used to indicate that failing the test does
not mean violating a web standard. For example:
```js
async_test((t) => {
const video = document.createElement("video");
assert_implements_optional(video.canPlayType("video/webm"));
video.src = "multitrack.webm";
// test something specific to multiple audio tracks in a WebM container
t.done();
}, "WebM with multiple audio tracks");
```
A failing `assert_implements_optional` call is reported as a status of
`PRECONDITION_FAILED` for the subtest. This unusual status code is a legacy
leftover; see the [RFC that introduced
`assert_implements_optional`](https://github.com/web-platform-tests/rfcs/pull/48).
`assert_implements_optional` can also be used during test setup. For example:
```js
setup(() => {
assert_implements_optional("optionalfeature" in document.body,
"'optionalfeature' event supported");
});
async_test(() => { /* test #1 waiting for "optionalfeature" event */ });
async_test(() => { /* test #2 waiting for "optionalfeature" event */ });
```
A failing `assert_implements_optional` during setup is reported as a status of
`PRECONDITION_FAILED` for the test, and the subtests will not run.
See also the `.optional` [file name convention](file-names.md), which may be
preferable if the entire test is optional.
## Cleanup ##
Occasionally tests may create state that will persist beyond the test itself.
In order to ensure that tests are independent, such state should be cleaned
up once the test has a result. This can be achieved by adding cleanup
callbacks to the test. Such callbacks are registered using the `add_cleanup`
function on the test object. All registered callbacks will be run as soon as
the test result is known. For example:
```js
test(function() {
var element = document.createElement("div");
element.setAttribute("id", "null");
document.body.appendChild(element);
this.add_cleanup(function() { document.body.removeChild(element) });
assert_equals(document.getElementById(null), element);
}, "Calling document.getElementById with a null argument.");
```
If the test was created using the `promise_test` API, then cleanup functions
may optionally return a "thenable" value (i.e. an object which defines a `then`
method). `testharness.js` will assume that such values conform to [the
ECMAScript standard for
Promises](https://tc39.github.io/ecma262/#sec-promise-objects) and delay the
completion of the test until all "thenables" provided in this way have settled.
All callbacks will be invoked synchronously; tests that require more complex
cleanup behavior should manage execution order explicitly. If any of the
eventual values are rejected, the test runner will report an error.
## Timeouts in Tests ##
In general the use of timeouts in tests is discouraged because this is
an observed source of instability in real tests when run on CI
infrastructure. In particular if a test should fail when something
doesn't happen, it is good practice to simply let the test run to the
full timeout rather than trying to guess an appropriate shorter
timeout to use.
In other cases it may be necessary to use a timeout (e.g., for a test
that only passes if some event is *not* fired). In this case it is
*not* permitted to use the standard `setTimeout` function.
Instead, one of these functions can be used:
* `step_wait` (returns a promise)
* `step_wait_func` & `step_wait_func_done`
* As a last resort, `step_timeout`
### `step_wait`, `step_wait_func`, and `step_wait_func_done` ###
These functions are preferred over `step_timeout` as they end when a condition or a timeout is reached, rather than just a timeout. This allows for setting a longer timeout while shortening the runtime of tests on faster machines.
`step_wait(cond, description, timeout=3000, interval=100)` is useful inside `promise_test`, e.g.:
```js
promise_test(async t => {
// …
await t.step_wait(() => frame.contentDocument === null, "Frame navigated to a cross-origin document");
// …
}, "");
```
`step_wait_func(cond, func, description, timeout=3000, interval=100)` and `step_wait_func_done(cond, func, description, timeout=3000, interval=100)` are useful inside `async_test`:
```js
async_test(t => {
const popup = window.open("resources/coop-coep.py?coop=same-origin&coep=&navigate=about:blank");
t.add_cleanup(() => popup.close());
assert_equals(window, popup.opener);
popup.onload = t.step_func(() => {
assert_true(popup.location.href.endsWith("&navigate=about:blank"));
// Use step_wait_func_done as about:blank cannot message back.
t.step_wait_func_done(() => popup.location.href === "about:blank");
});
}, "Navigating a popup to about:blank");
```
### `step_timeout` ###
As a last resort one can use the `step_timeout` function:
```js
async_test(function(t) {
var gotEvent = false;
document.addEventListener("DOMContentLoaded", t.step_func(function() {
assert_false(gotEvent, "Unexpected DOMContentLoaded event");
gotEvent = true;
t.step_timeout(function() { t.done(); }, 2000);
});
}, "Only one DOMContentLoaded");
```
The difference between `setTimeout` and `step_timeout` is that the
latter takes account of the timeout multiplier when computing the
delay; e.g., in the above case a timeout multiplier of 2 would cause a
pause of 4000ms before calling the callback. This makes it less likely
to produce unstable results in slow configurations.
Note that timeouts generally need to be a few seconds long in order to
produce stable results in all test environments.
For single-page tests, `step_timeout` is also available as a global
function.
## Harness Timeout ##
The overall harness admits two timeout values `"normal"` (the
default) and `"long"`, used for tests which have an unusually long
runtime. After the timeout is reached, the harness will stop
waiting for further async tests to complete. By default the
timeouts are set to 10s and 60s, respectively, but may be changed
when the test is run on hardware with different performance
characteristics to a common desktop computer. In order to opt-in
to the longer test timeout, the test must specify a meta element:
```html
```
Occasionally tests may have a race between the harness timing out and
a particular test failing; typically when the test waits for some event
that never occurs. In this case it is possible to use `test.force_timeout()`
in place of `assert_unreached()`, to immediately fail the test but with a
status of `TIMEOUT`. This should only be used as a last resort when it is
not possible to make the test reliable in some other way.
## Setup ##
Sometimes tests require non-trivial setup that may fail. testharness.js
provides two global functions for this purpose, `setup` and `promise_setup`.
`setup()` may be called with one or two arguments. The two argument version is:
```js
setup(func, properties)
```
The one argument version may omit either argument. `func` is a function to be
run synchronously. `setup()` becomes a no-op once any tests have returned
results. `properties` is an object which specifies global properties of the
test harness (enumerated in the following section).
`promise_setup()` allows authors to pause testing until some asynchronous
operation has completed. It has the following signature:
```js
promise_setup(func, properties)
```
Here, the `func` argument is required. This argument must be a function which
returns an object with a `then` method (e.g. an ECMAScript Promise instance);
the harness will wait for the fulfillment of this value before executing any
additional subtests defined with the `promise_test` function. If the value is
rejected, the harness will report an error and cancel the remaining tests.
`properties` may optionally be provided as an object which specifies global
properties of the test harness (enumerated in the following section).
### Setup properties ##
Both setup functions recognize the following properties:
`explicit_done` - Wait for an explicit call to done() before declaring all
tests complete (see below; always true for single page tests)
`output_document` - The document to which results should be logged. By default
this is the current document but could be an ancestor document in some cases
e.g. a SVG test loaded in an HTML wrapper
`explicit_timeout` - disable file timeout; only stop waiting for results
when the `timeout()` function is called (typically for use when integrating
with some existing test framework that has its own timeout mechanism).
`allow_uncaught_exception` - don't treat an uncaught exception as an error;
needed when e.g. testing the `window.onerror` handler.
`hide_test_state` - hide the test state output while the test is
running; This is helpful when the output of the test state may interfere
the test results.
`timeout_multiplier` - Multiplier to apply to per-test timeouts.
`single_test` - Test authors may set this property to `true` to enable [the
"single page test" mode of testharness.js](#single-page-tests); the current
test must not declare any subtests; testharness.js will interpret all events
which normally influence the harness status (e.g. uncaught exceptions,
unhandled promise rejections, and timeouts) in terms of a single
implicitly-defined subtest.
## Determining when all tests are complete ##
By default the test harness will assume there are no more results to come
when:
1. There are no `Test` objects that have been created but not completed
2. The load event on the document has fired
This behaviour can be overridden by setting the `explicit_done` property to
true in a call to `setup()`. If `explicit_done` is true, the test harness will
not assume it is done until the global `done()` function is called. Once `done()`
is called, the two conditions above apply like normal.
Dedicated and shared workers don't have an event that corresponds to the `load`
event in a document. Therefore these worker tests always behave as if the
`explicit_done` property is set to true (unless they are defined using [the
"multi-global" pattern](testharness.html#multi-global-tests)). Service workers
depend on the
[install](https://w3c.github.io/ServiceWorker/#service-worker-global-scope-install-event)
event which is fired following the completion of [running the
worker](https://html.spec.whatwg.org/multipage/workers.html#run-a-worker).
## **DEPRECATED** Generating tests ##
There are scenarios in which is is desirable to create a large number of
(synchronous) tests that are internally similar but vary in the parameters
used. To make this easier, the `generate_tests` function allows a single
function to be called with each set of parameters in a list:
```js
generate_tests(test_function, parameter_lists, properties)
```
For example:
```js
generate_tests(assert_equals, [
["Sum one and one", 1+1, 2],
["Sum one and zero", 1+0, 1]
])
```
Is equivalent to:
```js
var a_got = 1+1;
var a_exp = 2;
var a_nam = "Sum one and one";
var b_got = 1+0;
var b_exp = 1;
var b_nam = "Sum one and zero";
test(function() {assert_equals(a_got, a_exp)}, a_nam);
test(function() {assert_equals(b_got, b_exp)}, b_nam);
```
Note that the first item in each parameter list corresponds to the name of
the test.
The properties argument is identical to that for `test()`. This may be a
single object (used for all generated tests) or an array.
This is deprecated because it runs all the tests outside of the test functions
and as a result any test throwing an exception will result in no tests being
run. In almost all cases, you should simply call test within the loop you would
use to generate the parameter list array.
## Callback API ##
The framework provides callbacks corresponding to 4 events:
* `start` - triggered when the first Test is created
* `test_state` - triggered when a test state changes
* `result` - triggered when a test result is received
* `complete` - triggered when all results are received
The page defining the tests may add callbacks for these events by calling
the following methods:
`add_start_callback(callback)` - callback called with no arguments
`add_test_state_callback(callback)` - callback called with a test argument
`add_result_callback(callback)` - callback called with a test argument
`add_completion_callback(callback)` - callback called with an array of tests,
a status object, and an array of asserts
Tests have the following properties:
* `status` - A status code. This can be compared to the `PASS`, `FAIL`,
`PRECONDITION_FAILED`, `TIMEOUT` and `NOTRUN` properties on the
test object
* `message` - A message indicating the reason for failure. In the future this
will always be a string
The status object gives the overall status of the harness. It has the
following properties:
* `status` - Can be compared to the `OK`, `PRECONDITION_FAILED`, `ERROR` and
`TIMEOUT` properties
* `message` - An error message set when the status is `PRECONDITION_FAILED`
or `ERROR`.
Asserts have the following properties:
* `test` - The test that caused the assert.
* `assert_name` - The name of the assert that ran e.g. `assert_equals`
* `args` - An array of string representations of arguments passed to the assert
function.
* `status` - An integer representing the assert status. This has the same values
as the status property on a test.
For performance reasons asserts are only tracked when visual output is enabled.
When it's disabled the array of asserts will be empty.
## External API ##
In order to collect the results of multiple pages containing tests, the test
harness will, when loaded in a nested browsing context, attempt to call
certain functions in each ancestor and opener browsing context:
* start - `start_callback`
* test\_state - `test_state_callback`
* result - `result_callback`
* complete - `completion_callback`
These are given the same arguments as the corresponding internal callbacks
described above.
## External API through cross-document messaging ##
Where supported, the test harness will also send messages using cross-document
messaging to each ancestor and opener browsing context. Since it uses the
wildcard keyword (\*), cross-origin communication is enabled and script on
different origins can collect the results.
This API follows similar conventions as those described above only slightly
modified to accommodate message event API. Each message is sent by the harness
is passed a single vanilla object, available as the `data` property of the event
object. These objects are structured as follows:
* start - `{ type: "start" }`
* test\_state - `{ type: "test_state", test: Test }`
* result - `{ type: "result", test: Test }`
* complete - `{ type: "complete", tests: [Test, ...], status: TestsStatus }`
## Consolidating tests from other documents ##
`fetch_tests_from_window` will aggregate tests from separate windows or iframes
into the current document as if they were all part of the same test suite. The
document of the second window (or iframe) should include `testharness.js`, but
not `testharnessreport.js`, and use `test`, `async_test`, and `promise_test` in
the usual manner.
The current test suite will not report completion until
all fetched tests are complete, and errors in the child contexts will result in
failures for the suite in the current context.
Here's an example that uses `window.open`.
`child.html`:
```html
Child context test(s)
```
`test.html`:
```html
Primary test context
```
The argument to `fetch_tests_from_window` is any [`Window`](https://html.spec.whatwg.org/multipage/browsers.html#the-window-object)
capable of accessing the browsing context as either an ancestor or opener.
## Web Workers ##
The `testharness.js` script can be used from within [dedicated workers, shared
workers](https://html.spec.whatwg.org/multipage/workers.html) and [service
workers](https://w3c.github.io/ServiceWorker/).
Testing from a worker script is different from testing from an HTML document in
several ways:
* Workers have no reporting capability since they are running in the background.
Hence they rely on `testharness.js` running in a companion client HTML document
for reporting.
* Shared and service workers do not have a unique client document since there
could be more than one document that communicates with these workers. So a
client document needs to explicitly connect to a worker and fetch test results
from it using `fetch_tests_from_worker`. This is true even for a dedicated
worker. Once connected, the individual tests running in the worker (or those
that have already run to completion) will be automatically reflected in the
client document.
* The client document controls the timeout of the tests. All worker scripts act
as if they were started with the `explicit_timeout` option (see the [Harness
timeout](#harness-timeout) section).
* Dedicated and shared workers don't have an equivalent of an `onload` event.
Thus the test harness has no way to know when all tests have completed (see
[Determining when all tests are
complete](#determining-when-all-tests-are-complete)). So these worker tests
behave as if they were started with the `explicit_done` option. Service
workers depend on the
[oninstall](https://w3c.github.io/ServiceWorker/#service-worker-global-scope-install-event)
event and don't require an explicit `done` call.
Here's an example that uses a dedicated worker.
`worker.js`:
```js
importScripts("/resources/testharness.js");
test(function(t) {
assert_true(true, "true is true");
}, "Simple test");
// done() is needed because the testharness is running as if explicit_done
// was specified.
done();
```
`test.html`:
```html
Simple test
```
The argument to the `fetch_tests_from_worker` function can be a
[`Worker`](https://html.spec.whatwg.org/multipage/workers.html#dedicated-workers-and-the-worker-interface),
a [`SharedWorker`](https://html.spec.whatwg.org/multipage/workers.html#shared-workers-and-the-sharedworker-interface)
or a [`ServiceWorker`](https://w3c.github.io/ServiceWorker/#serviceworker-interface).
Once called, the containing document fetches all the tests from the worker and
behaves as if those tests were running in the containing document itself.
`fetch_tests_from_worker` returns a promise that resolves once all the remote
tests have completed. This is useful if you're importing tests from multiple
workers and want to ensure they run in series:
```js
(async function() {
await fetch_tests_from_worker(new Worker("worker-1.js"));
await fetch_tests_from_worker(new Worker("worker-2.js"));
})();
```
## List of Assertions ##
### `assert_true(actual, description)`
asserts that `actual` is strictly true
### `assert_false(actual, description)`
asserts that `actual` is strictly false
### `assert_equals(actual, expected, description)`
asserts that `actual` is the same value as `expected`.
Relies on `===`, distinguishes between `-0` and `+0`, and has a specific check for `NaN`.
### `assert_not_equals(actual, expected, description)`
asserts that `actual` is a different value to `expected`.
This means that `expected` is a misnomer.
Relies on `===`, distinguishes between `-0` and `+0`, and has a specific check for `NaN`.
### `assert_in_array(actual, expected, description)`
asserts that `expected` is an Array, and `actual` is equal to one of the
members i.e. `expected.indexOf(actual) != -1`
### `assert_object_equals(actual, expected, description)`
**DEPRECATED**: see [issue #2033](https://github.com/web-platform-tests/wpt/issues/2033).
asserts that `actual` is an object and not null and that all enumerable
properties on `actual` are own properties on `expected` with the same values,
recursing if the value is an object and not null.
### `assert_array_equals(actual, expected, description)`
asserts that `actual` and `expected` have the same
length and the value of each indexed property in `actual` is the strictly equal
to the corresponding property value in `expected`
### `assert_array_approx_equals(actual, expected, epsilon, description)`
asserts that `actual` and `expected` have the same
length and each indexed property in `actual` is a number
within ±`epsilon` of the corresponding property in `expected`
### `assert_approx_equals(actual, expected, epsilon, description)`
asserts that `actual` is a number within ±`epsilon` of `expected`
### `assert_less_than(actual, expected, description)`
asserts that `actual` is a number less than `expected`
### `assert_greater_than(actual, expected, description)`
asserts that `actual` is a number greater than `expected`
### `assert_between_exclusive(actual, lower, upper, description`
asserts that `actual` is a number between `lower` and `upper` but not
equal to either of them
### `assert_less_than_equal(actual, expected, description)`
asserts that `actual` is a number less than or equal to `expected`
### `assert_greater_than_equal(actual, expected, description)`
asserts that `actual` is a number greater than or equal to `expected`
### `assert_between_inclusive(actual, lower, upper, description`
asserts that `actual` is a number between `lower` and `upper` or
equal to either of them
### `assert_regexp_match(actual, expected, description)`
asserts that `actual` matches the regexp `expected`
### `assert_class_string(object, class_name, description)`
asserts that the class string of `object` as returned in
`Object.prototype.toString` is equal to `class_name`.
### `assert_own_property(object, property_name, description)`
assert that object has own property `property_name`
### `assert_not_own_property(object, property_name, description)`
assert that object does not have an own property named `property_name`
### `assert_inherits(object, property_name, description)`
assert that object does not have an own property named
`property_name` but that `property_name` is present in the prototype
chain for object
### `assert_idl_attribute(object, attribute_name, description)`
assert that an object that is an instance of some interface has the
attribute attribute_name following the conditions specified by WebIDL
### `assert_readonly(object, property_name, description)`
assert that property `property_name` on object is readonly
### `assert_throws_dom(code, func, description)` or `assert_throws_dom(code, constructor, func, description)`
`code` - the expected exception. This can take several forms:
* string - asserts that the thrown exception must be a DOMException
with the given name, e.g., "TimeoutError". (For
compatibility with existing tests, the name of a
DOMException constant can also be given, e.g.,
"TIMEOUT_ERR")
* number - asserts that the thrown exception must be a DOMException
with the fiven code value (e.g. DOMException.TIMEOUT_ERR).
`func` - a function that should throw
`constructor` - The DOMException constructor that the resulting DOMException should have as its `.constructor`. This should be used when a DOMException from a non-default global is expected to be thrown.
### `assert_throws_js(constructor, func, description)`
`constructor` - the expected exception. This is the constructor object
that the exception should have as its .constructor. For example,
`TypeError` or `someOtherWindow.RangeError`.
`func` - a function that should throw
### `assert_throws_exactly(value, func, description)`
`value` - the exact value that `func` is expected to throw if called.
`func` - a function that should throw
### `assert_implements(condition, description)`
asserts that a feature is supported, by checking if `condition` is truthy.
### `assert_implements_optional(condition, description)`
asserts that an optional feature is supported, by checking if `condition` is truthy.
See [Optional Features](#optional-features) for usage.
### `assert_unreached(description)`
asserts if called. Used to ensure that some codepath is *not* taken e.g.
an event does not fire.
### `assert_any(assert_func, actual, expected_array, extra_arg_1, ... extra_arg_N)`
asserts that one `assert_func(actual, expected_array_N, extra_arg1, ..., extra_arg_N)`
is true for some `expected_array_N` in `expected_array`. This only works for `assert_func`
with signature `assert_func(actual, expected, args_1, ..., args_N)`. Note that tests
with multiple allowed pass conditions are bad practice unless the spec specifically
allows multiple behaviours. Test authors should not use this method simply to hide
UA bugs.
## Utility functions ##
### **DEPRECATED** `on_event(object, event, callback)`
Register a function as a DOM event listener to the given object for the event
bubbling phase. New tests should not use this function. Instead, they should
invoke the `addEventListener` method of the `object` value.
### `format_value(value)`
When many JavaScript Object values are coerced to a String, the resulting value
will be `"[object Object]"`. This obscures helpful information, making the
coerced value unsuitable for use in assertion messages, test names, and
debugging statements.
testharness.js provides a global function named `format_value` which produces
more distinctive string representations of many kinds of objects, including
arrays and the more important DOM Node types. It also translates String values
containing control characters to include human-readable representations.
```js
format_value(document); // "Document node with 2 children"
format_value("foo\uffffbar"); // "\"foo\\uffffbar\""
format_value([-0, Infinity]); // "[-0, Infinity]"
```
## Metadata ##
It is possible to add optional metadata to tests; this can be done in
one of two ways; either by adding `` elements to the head of the
document containing the tests, or by adding the metadata to individual
`[async_]test` calls, as properties.